Raritan Command Center CC-SG Administrator'S Manual Download Page 163

Page: 163 / 270

HAPTER

10:

ENERATING

EPORTS

147

Users In Groups Report

The Users In Group report displays data on users and the groups with which they are associated.
1.

On the

Reports

menu, click

Users In Groups.

The

Users In Groups

report is generated.

Use the scroll bar to scroll through the list and view all entries.

Figure 175 Users In Groups Report

Click

Manage Report Data…

to save or print the report. Click

Save

to save the report to a

location of your choice or

Print

to print the report. Click

Close

to close the window.

Click

Close

to close the

Users In Groups

report.

Summary of Contents for Command Center CC-SG














































































































































































































































































Search results

Summary of Contents for Command Center CC-SG

Reviews:

Related manuals for Command Center CC-SG

Brands by name

Popular brands

Raritan Command Center CC-SG, Administrator'S Manual

Search results

Summary of Contents for Command Center CC-SG

Reviews:

Related manuals for Command Center CC-SG

Brands by name

Popular brands