Raritan Command Center CC-SG, Administrator'S Manual

Page: 206 / 270

190 C
OMMAND
C
ENTER
S
ECURE
G
ATEWAY
A
DMINISTRATOR
G
UIDE
Remove Secondary CC-SG Node
1. To remove Secondary Node status from a CC-SG unit and reassign it to a different unit in
your configuration, select the Secondary CC-SG Node in the Cluster Configuration table and
click
Remove “Backup” Node.
2. When the confirmation message appears, click
Yes
to remove Secondary Node status, or
click
No
to cancel.
Note: Clicking Remove “Backup” Node does not delete the Secondary CC-SG unit from your
configuration; it simply removes the designation of Secondary Node.
Remove Primary CC-SG Node
1. To remove Primary Node status from a CC-SG unit and reassign it to another unit in your
configuration, select the Primary CC-SG Node in the Cluster Configuration table and click
Remove Cluster.
2. When the confirmation message appears, click
Yes
to remove Primary Node status, or click
No
to cancel.
Note: Clicking Remove Cluster does not delete the Primary CC-SG unit from your configuration;
it simply removes the designation of Primary Node. Remove Cluster is only available when no
backup nodes exist.
3. Click
Close
to exit the Cluster Configuration screen.
Recover a Failed CC-SG Node
When a node fails and failover occurs, the failed node will recover in
Waiting
status.
1. Select the Waiting node in the Cluster Configuration table.
2. Add it as a backup node by clicking
Join “Waiting” Node.
3. A confirmation message will appear. Click
Yes
to assign Secondary status to the selected
node, or click
No
to cancel. If you click
Yes
, you will need to wait for the secondary node to
restart just as with
Join “Backup” Node.
Note: Once a node is in Waiting status it can be started in Standalone mode or Backup mode.
Figure 235 Recovering a node from Waiting status