Raritan Command Center CC-SG, Administrator'S Manual

Page: 96 / 270

80 C
OMMAND
C
ENTER
S
ECURE
G
ATEWAY
A
DMINISTRATOR
G
UIDE
11. Click
In-Band Parameters
if you want to allow in-band access for this Serial port.
Figure 97 In-Band Parameters
12. Click on the
In-band application
drop-down arrow and select either
RemoteDesktop
Viewer
,
SSH Client
,
VNC Viewer
. Type the IP address of the target associated with this
port in the
Target IP Address
field, type the port used by the In-band application in
Target
TCP Port
, and type a username that is used to login to the in-band application in the
Target
Username
field. Click
OK
to save the In-band parameter settings or
Cancel
to exit without
saving.
13. Click
OK
to configure the serial port or
Cancel
to exit without configuring. A
Port
Configured Successfully
message confirms that the port has been created.
14. Repeat steps 1 through 11 to configure other serial ports.
Note: For KSX power ports and SX serial ports, associating a device with the port is available in
the Configure Serial screen and not in the In-Band parameters screen.