Raritan Command Center CC-SG, Administrator'S Manual

Page: 169 / 270

C
HAPTER
11: S
YSTEM
M
AINTENANCE
153
Chapter 11: System Maintenance
Reset CC-SG
Use the Reset CommandCenter command to reset CC-SG database data – please note that this
command will not reset system configuration data, such as the IP address of CC-SG.
1.
On the
Setup
menu, click
Reset CommandCenter.
Figure 180 Reset CC-SG Screen
2. Type your CC-SG
password
.
3. Either accept the current
Broadcast message
or edit to create one of your own.
4. Type the number of minutes in which to wait until CC-SG is reset in
Reset after (min)
.
Default is 0, which will reset the CC-SG unit immediately.
5. Click
OK
to reset your CC-SG unit. A success message will appear to confirm the reset.
Important: Using the Reset command will flush the database of CC-SG. All
Devices, Ports, and Users will be removed from the CC-SG. Authentication is
also reset to using Local DB. You should back up the CC-SG before using
Reset.
Backup CC-SG
1. On the
Setup
menu, click
Backup CommandCenter.
2. When the
Backup CommandCenter
screen appears, if desired, check
Do not backup logs
if
you do not want the log files backed up. Also check
Do not backup firmware binaries
if
you do not want the device firmware binaries to be backed up. Checking these options saves
time and disk space.
Figure 181 Backup CC-SG Screen
3. Click
OK
. The backup file will be saved in the CC-SG file system, and can be restored at a
later time and a success message will appear to confirm CC-SG backup.