Raritan Command Center CC-SG, Administrator'S Manual

Page: 164 / 270

148 C
OMMAND
C
ENTER
S
ECURE
G
ATEWAY
A
DMINISTRATOR
G
UIDE
Query Port Report
The Query Port Report displays all ports according to port status.
1.
On the
Reports
menu, click
Query Port.
The
Query Port
screen appears.
Figure 176 Query Port Report
2. Click on one or more checkboxes to customize the port information you want to see in the
report.
P
ORT
S
TATUS
D
EFINITION
New Port is available (physical connection to target server is in
place), but the port has not been configured. Click
Configure
next to the port in the report to configure it now.
Unused Port is unavailable (physical connection to target server is not
in place) and the port has not been configured. Click
Configure
next to the port in the report to configure it now if
the device is available.
Available Port has been configured and connection to port is possible.
Unavailable Connection to port is not possible since the device is down and
unavailable.
Busy A user is connected to this port.
3.
Click
Apply
to generate the report. Checking more than one checkbox and clicking
Apply
will display ports with ALL statuses that are selected.
4. Check the
Show Ghosted Ports
checkbox in conjunction with one or more port statuses to
display ports that have the selected port status in addition to being
ghosted
. A ghosted port
can occur when managing Paragon devices and when a CIM or target server is removed from
the system or powered off (manually or accidentally). Refer to Raritan’s
Paragon II User
Manual
for additional information.
5. Click on any of the column headers to sort the ports by that attribute in ascending order. Click
on the header again to sort the ports in descending order.
6. Click
Close
to close the
Query Port
report.