Raritan Command Center CC-SG, Administrator'S Manual

Page: 207 / 270

C
HAPTER
12:
ADVANCED ADMINISTRATION
191
Set Advanced Settings
To configure advanced settings of a cluster configuration:
1.
Select the Primary node just created.
2. Click
Advanced
. The
Advanced Settings
window appears.
Figure 236 Cluster Configuration Advanced Settings
3. For
Time Interval
, enter how often CC-SG should check its connection with the other node.
Note: Setting a low Time Interval will increase the network traffic generated by heartbeat checks.
Also, clusters with nodes located far apart from each other may want to set higher intervals.
4. For
Failure Threshold
, enter the number of consecutive heartbeats that must pass without a
response before a CC-SG node is considered failed.
5. For
Recover After
, enter the number of consecutive heartbeats that must successfully be
returned before a failed connection is considered recovered.
6. Click
OK
to save the settings or
Cancel
to exit without saving.
Note: Changing the time zone is disabled in a cluster configuration.
Task Manager
Use Task Manager to schedule CC-SG tasks on a daily, weekly, monthly, or yearly basis. A task
can be scheduled to run only once or periodically on a specified day of the week and at a
specified interval, such as, scheduling device backups every three weeks on Fridays or emailing a
particular every Monday to one or more recipients.
Note: Tasks use the Server time that is set on CC-SG for scheduling and not the time on your
client PC.
Task Types
These tasks can be scheduled:
•
Backup Device Configuration (individual device or device group)
•
Restore Device Configuration (does not apply to device groups)
•
Copy Device Configuration (individual device or device group)
•
Upgrade Device Firmware (individual device or device group). Note that the firmware should
be made available before scheduling this task.
•
Backup Command Center Secure Gateway
•
Restart Device (does not apply to device groups)