Raritan Command Center CC-SG, Administrator'S Manual

Page: 41 / 270

C
HAPTER
3: E
XAMPLE
C
ONFIGURATION
W
ORKFLOW
25
3. Click
Configure
next to the serial port line item you wish to configure. The
Configure
Serial Port
screen appears.
Figure 24 Configure Serial Ports
4. Type a port name in
Port Name
field. Typically, you should name the port after the target
server the device connects to, for example,
NYC_MsSrv1
.
5. Click on the
Application Name
drop-down menu and select an application name. This
application, for example, Raritan Console (RC), is used to manage the target system.
6. Click on the
Baud Rate
drop-down arrow and select a rate.
7. Click on the
Parity/Data Bits
drop-down arrow and select a parity value.
8. Click on the
Flow Control
drop-down arrow and select a flow control value.
9. Click on the
Associate Power Strip
drop-down arrow and associate with a power strip if
necessary.
10. Select the associated category and element from the
Port Associations
table by double-
clicking the element field.
11. Click
OK
to save the serial port configuration. A
Port Configured Successfully
message
confirms that port has been created.
12. Repeat steps 1 through 11 to configure other serial ports.