Raritan Command Center CC-SG, Administrator'S Manual

Page: 173 / 270

C
HAPTER
11: S
YSTEM
M
AINTENANCE
157
Upgrade CC-SG
Note: If you are operating a CC-SG cluster, you must remove the cluster first and upgrade each
node separately.Before you can upgrade CC-SG, you must be in Maintenance Mode. See section
Maintenance Mode in Chapter 11: System Maintenance for additional information.
1. On the
Setup
menu, click
Upgrade CommandCenter
. The
Upgrade CommandCenter
screen appears.
Figure 185 Upgrade CC-SG Screen
2. If you are upgrading from an older CC-SG, click
Browse
and navigate to the current location
of your CC files.
3. Click
OK
.
Restart CC-SG
1. On the
Setup
menu, click
Restart CommandCenter
. The
Restart CommandCenter
screen
appears.
Figure 186 Restart Screen
2. Type your password in the
Password
field.
3. Accept the default message or type a message to display to any users currently online in the
Broadcast message
field (for example, you might give users a brief time period to finish
their tasks in CC-SG or tell them why you are restarting the system). All users will be
disconnected when you restart CC-SG.
4. Type how much time (in minutes) should pass before CC-SG restarts in the
Restart after
(min)
field.