Raritan Command Center CC-SG, Administrator'S Manual

Page: 204 / 270

188 C
OMMAND
C
ENTER
S
ECURE
G
ATEWAY
A
DMINISTRATOR
G
UIDE
Create a Cluster
In the event of a failover, the administrator should send an email to all CC-SG users, notifying
them to use the IP address of the “new” Primary CC-SG node.
Important: It is recommended to backup your configuration on both nodes
before setting up a cluster configuration.
Set Primary CC-SG Node
1. On the
Setup
menu, click
Cluster Configuration
. The Cluster Configuration screen appears.
2. Click
Discover CommandCenters
to scan and display all CC-SG appliances on the same
subset as your one you are currently using. Alternatively, you can add a CC-SG, perhaps
from a different subnet, by specifying an IP address in
CommandCenter address
in the
bottom of the window. Click
Add CommandCenter
.
Figure 232 Cluster Configuration Screen
3. Type a name for this cluster in
Cluster Name
. If you do not provide a name now, a default
name will be provided, such as
cluster192.168.51.124
, when the cluster is created.
4. Click
Create Cluster
.
5. Click
Yes
when prompted if you want to continue. The CC-SG you currently are using will
become the Primary node and a default name will be provided unless you previously entered
one.
Figure 233 Cluster Configuration – Primary Node Set