Raritan Command Center CC-SG, Administrator'S Manual

Page: 183 / 270

C
HAPTER
12:
ADVANCED ADMINISTRATION
167
4. Click on the
Advanced
tab.
Figure 200 Extra Initialization Commands
5. Type an initialization command in
Extra initialization commands
that will be used by your
modem to set the “Carrier detection” flag. For example, type
at&c
for a SoftK56 Data Fax
modem. This is necessary to tell Windows not to close the started Modem connection process
when the modem connection is closed from the other (dialed-in) side. Click
OK
to save the
settings.
Configure the Dial-Up Connection
The following procedure illustrates creating an inbound dial-up connection to CC-SG from a
Windows XP client machine:
1.
On the
start
menu, click
My Network Places
.
2. Right-click in the window and select
Properties
.
3. Under
Network Tasks
in the
Network Connections
window, click
Create a new
connection
.
Figure 201 Create a new connection