RADWAG MAS 1. Y, User Manual

Page: 95 / 201

- 95 -
For sample measured under:
•
weighing A procedure only – tare value is <0>,
•
weighing T procedure only – weighing A value is <0>,
•
weighing T+A procedure – tare and weighing A values is mass.
You can print weighed sample data, to do it press a printer pictogram located in the top bar.
In order to preview data on weighing A, press <Weighing A> field:
If a given series already contains samples for which weighing A (initial mass) has been
carried out you can proceed to carrying out weighing B (final mass).
Weighing B
Select:
Upon pressing Weighing B button, the balance searches samples list in order to find
the first sample for which weighing <B> is still to be carried out. If there are no such
samples the balance displays a message informing you that the operation is disabled.
If the operation is enabled then new data on initiated process is displayed in the grey
workspace.
CAUTION:
Next to <Weighing B> caption you can see digits 1/3 where <1> means the first
measuring cycle of type B, and <3> means that <REPETITIONS QUANTITY>
parameter is set to <3> value (3 cycles).
The software prompts you to carry out the <FIRST> cycle, out of <3> cycles, for all
samples in the series for which the measurement is enabled (it is required that
weighing A is already completed for the sample).
You are guided through the process by means of prompts visible either in the
workspace or bottom bar.