RADWAG MAS 1. Y, User Manual

Page: 173 / 201

- 173 -
x - balance series (inserted in between inverted commas), with general balance type in front.
Example:
Command: BN <CR><LF> - give module type
Response: BN_A_”AS” Balance type XA 4Y
Give max capacity
Format: FS <CR><LF>
Response options:
FS_A_”x” <CR><LF> - command understood, response: module max capacity
FS_I <CR><LF> - command understood but not accessible at this moment
x - Max value of reading units (in between inverted commas)
Example:
Command: FS <CR><LF> - return Max capacity
Response: FS_A_”220.0000”
- Max capacity: ”220 g”
Give program version
Format: RV <CR><LF>
Response options:
RV_A_”x” <CR><LF> - command understood, response: program version
RV_I <CR><LF> - command understood but not accessible at this moment
x - program version (in between inverted commas)
Example:
Command: RV <CR><LF> - return program version
Response: RV_A_” 1.1.1” - program version: ”1.1.1”
Set AUTOZERO function
Format: A_n <CR><LF>
Response options:
A_OK <CR><LF> - command carried out
A_E <CR><LF>
- error in-course of command execution, no parameter or incorrect
format
A_I <CR><LF> - command understood but not accessible at this moment
n - parameter, decimal value determining autozero settings
n
→
0 – autozero off
1 – autozero on
CAUTION:
Command changes settings for a current working mode.
Example:
Command: A_1<CR><LF> - turn autozero function on
Response: A_OK<CR><LF> - autozero function is on
AUTOZERO function operates until it is turned off by A 0 command.
Set ambient conditions state
Format: EV_n <CR><LF>
Response options:
EV_OK<CR><LF> - command carried out
EV_E <CR><LF> - error in-course of command execution, no parameter or incorrect