RADWAG MAS 1. Y, User Manual

Page: 109 / 201

- 109 -
•
You have not selected product from the database, message: <Product is not selected>
is displayed.
28.6. Abort Control Procedure
You can abort control at any moment by pressing button (abort control) located in the
bottom part of the process window.
Upon pressing (control stop) button, the following message is displayed:
Press button to return to the ongoing control. Press button to abort control and
return to PGC mode.
Control report with < Aborted > status is saved to PGC database.
28.7. Aborted Control Restoring Procedure, Power Loss Case
In case of disconnection from the mains, to prevent loss of data for control being in progress,
the program continuously records control results.
For power loss case the software allows to complete aborted control upon reconnection to
the mains.
CAUTION:
Remember to restart the balance when unloaded. It is obligatory to run the balance
with an empty weighing pan.
During balance restart the software searches for any in course control procedure. If there is
one, the following message is displayed:
Press button to leave control procedure and proceed to weighing.
Press button to complete aborted control procedure.