RADWAG MAS 1. Y, User Manual

Page: 171 / 201

- 171 -
n - parameter, decimal value determining working mode number. To see detailed description
go to OMI command.
Example:
Command: OMS_13<CR><LF> - set STATISTICS mode
Response: OMS_OK<CR><LF>
- STATISTICS mode set
Give current working mode
Command overview:
Command returns accessible working modes.
Format: OMG<CR><LF>
Response options:
OMG_n_OK <CR><LF>
- command carried out, response: current working mode
OMG_I <CR><LF> - command understood but not accessible at this moment
n - parameter, decimal value determining working mode number. To see detailed description
go to OMI command.
Example:
Command: OMG<CR><LF> - return current working mode
Response: OMG_13_OK<CR><LF>
- balance set to STATISTICS mode
Give accessible units
Command overview:
Command returns units available for a particular device and for a current working mode.
Format: UI <CR><LF>
Response options:
UI_”x
1
,x
2
, … x
n
”_OK<CR><LF> - command carried out, returns accessible units
UI_I <CR><LF> - command understood but not accessible at this moment
X - unit symbols, separated by means of commas.
x
→ g, mg, ct, lb, oz, ozt, dwt, tlh, tls, tlt, tlc, mom, gr, ti, N, baht, tola, u1, u2
Example:
Command: UI <CR><LF> - return available units
Response: UI_”g, mg, ct”_OK<CR><LF> - response: available units
Set current unit
Command overview:
Command sets current unit for a particular device.
Format: US_x <CR><LF>
Response options:
US_ x_OK <CR><LF>
- command carried out, returns accessible units
US_E <CR><LF> - error in-course of command execution, no parameter or
incorrect format
US_I <CR><LF> - command understood but not accessible at this moment
x - parameter, units symbols: g, mg, ct, lb, oz, ozt, dwt, tlh, tls, tlt, tlc, mom, gr, ti, N, baht,
tola, msg, u1, u2, next.
Caution :
If x=next the command swaps to another available unit on the list (it simulates button