RADWAG MAS 1. Y, User Manual

Page: 111 / 201

- 111 -
After the last packaging mass measurement has been performed, the following message is
displayed:
Press button to proceed to control without saving the newly estimated average
packaging mass to product data.
Press button to proceed to control with saving the newly estimated average packaging
mass to product data.
During the control process the software continuously analyses measurements results and
displays them in the appropriate fields informing the user about the control results:
Where:
Bar Graph - Information on product net weight in a form of graph:
green bar graph– mass within tolerance range: between [-T]
and [+T] of net weight.
yellow bar graph– mass within tolerance range: between [-T]
and [-2T] of net weight.
red bar graph– mass below net mass [NET – 2T].
Product - Name of the controlled product
- Nominal value of the controlled product
- Average mass of the controlled product
- Disqualifying average value
- Characteristics of sample's T negative errors:
-9g - value of T negative error,
T Max - permissible quantity of T negative error,
n - actual quantity of T negative errors.