- 132 -
ss - second of control end.
You can preview data on each control.
Procedure:
•
Enter
<
Databases>
submenu in accordance with section 30 of this user manual.
•
Enter
< SQC reports>
database and press respective record.
List of parameters defined for control:
1. Batch number [batch number of controlled product]
2. Result [control status (result)]
3. Start date [control start date]
4. End date [control end date]
5. Product [name of controlled product]
6. Operator [name of an operator carrying out control]
7. Average [average value from carried out measurements]
8. Average limit [average disqualifying value]
9. Standard deviation [average standard deviation]
10. Batch quantity [quantity of a batch; value for which
the software accepts the size of tested sample in
accordance with the regulation]
11. Measurements quantity [quantity of carried out measurements]
12. Method [control method
(regulated by the act, by internal criteria or by SQC)]
13. Measurements graph
14. Control process graph with thresholds:
Summary of Contents for MAS 1. Y
