RADWAG MAS 1. Y, User Manual

Page: 61 / 201

- 61 -
17. CHECKWEIGHING
< Checkweighing> is a working mode using two thresholds (Min and Max) for control
of samples weight. Usually the weight is considered to be correct if it is comprised within
threshold values.
Checkweighing mode screen:
1. Setup – press to access balance menu.
2. Print header – press to print data declared in
the header.
3. Print footer – press to print data declared in
the footer.
4. Products Database – press to select products
from products database.
5. Set Tare – press to enter tare.
6. Checkweighing thresholds – press to declare
Min and Max threshold values.
17.1. Making Use of Checkweighing Thresholds
There are two methods for making use of the checkweighing thresholds:
−
selecting product < > with Min and Max threshold declared,
−
entering numeric value for the thresholds < >; in this case thresholds do not refer
to any product.
Procedure 1 – selecting product from Products Database:
•
Press button (Product database), list of products is displayed.
•
Select the product that is to be weighed.
•
The balance displays threshold values under the bar graph within the INFO area.
•
Bar graph is displayed, its colour corresponds to the current status of mass:
o
yellow: mass value lower than Min threshold value,
o
green: mass value higher than Min threshold value and lower than Max threshold
value,
o
red: mass value higher than Max threshold value.
Procedure 2
– entering checkweighing thresholds manually:
•
Press button (Checkweighing thresholds).
•
Press Min threshold button and enter its value.
•
Press button to confirm.
•
Press Max threshold button and enter its value.
•
Press button to confirm.
Caution: Max threshold value has to be greater than Min threshold value.