RADWAG MAS 1. Y, User Manual

Page: 129 / 201

- 129 -
•
Enter < PGC> mode and select a desired control record.
List of parameters defined for control:
1. Batch number [batch number of controlled product]
2. Result [control status (result)]
3. Start date [control start date]
4. End date [control end date]
5. Product [name of controlled product]
6. Operator [name of an operator carrying out control]
7. Average [average value from carried out measurements]
8. Average limit [average disqualifying value]
9. Standard deviation [average standard deviation]
10. Batch quantity [quantity of a batch; value for which the software
accepts the size of tested sample in accordance with
the regulation]
11. Measurements quantity [quantity of carried out measurements]
12. Method [control method (regulated by the act or by internal
criteria)]
30.9. Average Tares
(mode not available in balance’s standard version)
Prior to <Non-destructive average tare> control you can determine average tare by
packages weighing. Each process is automatically saved to < Average tares > database.
Each control saved to the database features specific number assigned at the moment of
control completion.
Control number format:
X / y y / M M / d d / H H / m m / T
, where:
X – control type, marked as follows:
U – control regulated by the act,
Z – control completed by an operator,
W – control regulated by internal criteria,
yy - year of control end,
MM - month of control end,
dd - day of control end,
HH - hour of control end,
mm - minute of control end,
T - control with determining average tare value
You can preview data on each process of average tare value determination.
Procedure:
•
Enter < Databases > submenu in accordance with section 30 of this user manual.
•
Enter < PGC > mode and select a desired control record.
List of parameters defined for average tare:
1. Product [name of a product which packaging is subjected to
average tare value determination]
2. Status [process status (result)]