RADWAG MAS 1. Y, User Manual

Page: 131 / 201

- 131 -
4. Start date
5. End date
6. Operator [name of an operator carrying out calibration]
7. Customer [customer name]
8. Measurements quantity [quantity of measurements for each tested
volume]
9. Operation with adherence to ISO
8655 [information if errors comply with the
standard]
10. Status
[information whether err
ors are below
permissible values
accepted for the tested
volume]
11. Temperature [average temperature value during the
process]
12. Humidity [average humidity value during the process]
13. Pressure [average pressure value during the process]
14. Water temperature [average water temperature during the
process]
15. Z coefficient [coefficient value for given temperature]
30.12. Series
Series database contains series data and samples measurements.
Procedure:
•
Enter < Databases> submenu and press < Series> entry.
•
Press < Add> button to add a new series, or
•
Select already existing series.
List of parameters defined for series:
1. Name
2. Code
3. Customer
4. Samples
5. Samples quantity
30.13. SQC Reports
Each report on completed product control is sent to a printer and saved to the
<SQC
reports> database. Each control saved to the database features specific number assigned
at the moment of control completion.
Control number format:
y y / M M / d d / H H / m m / s s
, where:
yy - year of control end,
MM - month of control end,
dd - day of control end,
HH - hour of control end,
mm - minute of control end,