RADWAG MAS 1. Y, User Manual

Page: 78 / 201

- 78 -
CAUTION:
In order to use the above options it is necessary to add respective quick access buttons to
the bottom bar and set formulations mode parameters.
Select a formulation, weigh each of its ingredients. Wait for the indication to stabilize and
press < > button. Weight of each ingredient is tared upon pressing < > button; i.e. it is
accepted for the total mass of the formulation.
Press button to cancel all operations regarding formulation making process. Now you
can prepare a different formulation.
Procedure 1 – formulation not recorded in the Formulation Database – manual preparation.
Follow the displayed prompts.
•
Go to quick access bar and press button (Start).
•
Name the formulation.
•
Select ingredients for a formulation.
•
Select the first ingredient (new or from database of products).
•
The home screen is displayed.
•
Put the container used for carrying out the measurement on a weighing pan and tare it
when the indication is stable.
•
Dispense specified amount of ingredient.
•
Press < > button to confirm.
•
Select the next ingredient.
•
Repeat the steps for remaining mixture ingredients.
•
With all the ingredients weighed, select one of the following options:
- <Save and finish> - select to save the process to formulations database, the process
is finished automatically, the final report is recorded in formulation database.
- <Finish> - select to complete without saving the process to formulations database the
process is finished automatically, the final report is recorded in formulation database.
•
Upon completion, formulation home screen is displayed, message <Completed> is
visible in the bottom bar. To proceed press < > button.
Caution:
It is possible to abort formulation making process at any moment. To abort the process
press > button.
Procedure 2 – formulation recorded in the Formulation Database.
Basic recipe making process. Procedure 2 allows you to prepare mixtures with multiplied
amount of ingredients.
Follow the displayed prompts.
•
Press < > button (Formulation).
•
List of Formulations is displayed, select the formulation that is to be carried out.
•
Press < > button (Formulation with multiplier).
If in Formulation mode settings <Multiplier's editing> option is disabled (set to <NO>
value) the software automatically skips to formulation making process. If the
<Multiplier's editing> option is enabled (set to <YES>) the software displays a window
with a keyboard for inserting the multiplier value. Mass of all formulation ingredients is