RADWAG MAS 1. Y, User Manual

Page: 146 / 201

- 146 -
Speed of transmission respective for a printer (see: Printer settings) must be selected for
the module to ensure its right cooperation with a printer (diacritical signs specified for a
given language). Additionally, printout and printer code pages must be identical.
Code page accordance may be obtained as follows:
−
by setting the right code page in the printer (see the printer manual) – respective to
printout code page set in a module; or
−
by sending control code, from a balance to the printer, which automatically sets the
right code page (respective to code page set in a balance ) in advance before
execution of the data printout – it is possible only for printers equipped with such
option.
Exemplary balance settings for correct cooperation (printout of Polish signs) with EPSON
thermal printer connected to RS232 port:
1. EPSON TM-U220x Dot matrix printer
Communication parameters:
•
baud rate – 9600 bit/s
•
data bits – 8
•
stop bits – 1
•
parity – none
Printer’s parameters:
•
port – COM 1 or COM 2 (the one to which the printer is connected)
•
code page – 852
•
control codes – 1B7412
2. EPSON TM-T20 2. Thermal printer
Communication parameters:
•
baud rate – 38400 bit/s
•
data bits – 8
•
stop bits – 1
•
parity – none
Printer’s parameters:
•
port – COM 1 or COM 2 (the one to which the printer is connected)
•
code page – 1250
•
control codes – 1B742D
Printer’s parameters:
•
port – COM 1 or COM 2 (the one to which the printer is connected)
•
code page – 852
•
control codes – 1B7412
If there are any unexpected signs on the printout in the place of the last digit (for verified
balances), then <CONTROL CODES> parameter must incorporate, apart from the code
page, code of the UK signs chart:
1B5203. In such case the <CONTROL CODES>
parameter setting has to be as follows: control codes – 1B74121B5203
A printout template describes how to print information from databases.
The template can be modified. In order to check format of printout template, print data
related to e.g. product parameters. – function activated on moving to <Products/Edit
product> database and pressing printer pictogram.
Default values for particular printouts:
Product printout template {50}
{51}