RADWAG MAS 1. Y, User Manual

Page: 74 / 201

- 74 -
Using header and footer information
Procedure:
•
Press < Print header> button.
•
Carry out density determination procedure.

Report is printed out automatically after the second measurement confirmation.

When density determination result is displayed, the report can be printed
repeatedly by pressing < PRINT > button.
•
Press < Print footer> button upon completion of density determination
procedure.
CAUTION:
Remember to select data to be printed in the header, footer and report. For detailed
information go to section 14.5, Printouts.
21. ANIMAL WEIGHING
< Animal weighing> is a working mode allowing reliable determination of mass of
weighed objects in motion. In principle, this type of objects generate unstable measurement,
thus it requires using a different filtering method of measurement signal.
Animal weighing mode screen:
1. Setup – press to access balance menu.
2. Print header – press to print data declared in the
header.
3. Print footer – press to print data declared in the
footer.
4. Products Database – press to select products from
products database.
5. Set tare.
6. Animal weighing.
21.1. Animal Weighing Settings
Animal Weighing mode parameters must be set with regard to selected mass analysis
method.
Procedure:
1. Press < Animal weighing> button.
2. List of Animal Weighing parameters is displayed:
•
Averaging time
Time interval within which measurements are analysed. Obtained data is used for calculation
of measurement result.
•
Automatic operation
Parameter determining whether the measurement is to be carried out manually (on pressing
a key), or automatically. The measurement starts automatically if indication on balance’s
display exceeds the value of a set threshold. Measurement of the next object begins after
removing one object from the weighing pan (the indication is below threshold value) and