HyperTrack™
Software Instruction
75
Quasonix, Inc.
Figure 85: Motion Test
The four motion control entry parameters are:
•
Position
EL Position
AZ Position
•
Position Relative
EL Position Relative
Az Position Relative
•
Velocity
EL Velocity
AZ Velocity
•
Misc.
Clear Faults button
Stop Movement button
Figure 86: Motion Test Entry Parameters
4.2.1.8.5.1 Position
The Position parameters, shown in Figure 86, command the antenna to the AZ and EL angles. Type or use the
Up/Down arrows to set the axis and elevation values. In this example, the antenna slews to 0.0 Azimuth and 0.0
Elevation when the Go button is selected.
4.2.1.8.5.2 Position Relative
The Position Relative parameters command the antenna to the AZ and EL positions relative to their start positions.
Type or use the Up/Down arrows to set the axis and elevation positions. In this example, assume the antenna was at
