HyperTrack™
Software Instruction
41
Quasonix, Inc.
Figure 42: Channel Map, Receiver Channel Drop Down Menu
4.2.1.5.2.8 Slaving
The Mission
–
Slaving window provides a means of adding, editing, or deleting slaving sources for antenna pointing
purposes. This location is where the source parameters such as, Name, Description, and Source IP address are
entered and stored. The only slave source provider available is the Standard Ethernet.
4.2.1.5.2.8.1 Add Slave Source
Select the Add Source button. When the Add Slave Source window displays, as shown in Figure, type the source
Name, Description, and IP address for recall. The only slave source input available (in the Provider field) is a
Standard Ethernet. This is selected from the drop down menu. Select the Save button to add the slave source.
4.2.1.5.2.8.2 Edit Slave Source
Select the Edit Source button to make changes to any listed slave source. Type updates in the Edit Source window
(similar to the Add Slave Source window) to make changes to any listed slave source(s). Select the Save button to
save the changes.
4.2.1.5.2.8.3 Delete Slave Source
Select the source line entry to delete. Select the Delete Source button to remove the highlighted line from the
available saved sources.
