HyperTrack™
Software Instruction
40
Quasonix, Inc.
Figure 41: Mission, Receivers
—
Channel Map
Within the Channel Map window, the tracking channel IP address for each receiver is added using these steps:
After adding
Receiver #1’s Tracking Channel IP
addresses in the Receivers window, the r
eceiver’s three tracking
channels (1, 2, and 3) must be selected by double clicking the Receiver Channel field.
A channel name is selected from the drop down menu for each of the receiver
’
s three tracking channels, as shown in
Figure 42. In this example, Channel 1, Channel 2 and Combiner are selected.
If a second receiver is entered, it displays in the Tracking Channel column, lines of 4, 5, and 6. Receiver #2,
Tracking Channel 4 could also be named Receiver Channel 1 (from the drop down menu), Tracking Channel 5
would be named Receiver Channel 2, and Tracking Channel 6 would be named Receiver Channel Combiner.
This pattern of entering and naming receivers would continue for any additional receivers added.
