QMS ColorScript 310, User Manual

Page: 43 / 196

Loading a Stack of Paper or Film
25
6.
Rotate the metal side rail locks back into place.
7.
Position the end stop to accommodate the new media.
Squeeze the sides of the end stop and slide it to the position
marked for the media size you are loading. The end stop
locks into place.
8.
Gently fan the stack of paper or film, and neatly stack
the paper shiny-side (print-side) down.
NOTE:
Dye sublimation transfer paper has a shiny surface on the
print side, and a satin finish on the back. The paper must be inserted
shiny-side down. Avoid touching the print-side of paper or film with
your fingers; fingerprint oil can affect print quality.
9.
Position the stack so that the front edge is over the metal
lift plate, beneath the two metal flanges.
The media should settle neatly into the bottom of the paper
tray between the side rails.
Figure 2-6 Placing the Media into the Paper Tray
Insert Media Under
Media Settles Between
Side Rails Metal Flanges