QMS ColorScript 310, User Manual

Page: 148 / 196

Chapter 6 — Upgrading Your Printer
130
Installing additional memory requires that the technician
remove the ColorScript 310/330 printer’s logic board and add
Single In-line Memory Modules (SIMMs) to the memory slots
on the logic board.
WARNING:
Each pair of SIMMs must be of the same size
and speed, and all SIMMS must be 72-pin, 32-bit (no parity)
SIMMs, 70ns or faster.
In Table 6-1, QMS Europe B.V. recommends three standard
memory configurations. Although other memory configurations
are possible, these three memory configurations are the most
common and most cost effective memory solutions for most
printing requirements.
Table 6-1 Recommended Memory Configurations
Printer Model
Factory Installed
Configuration
Maximum Practical
Configuration
Maximum Possible
Configuration
ColorScript 310 Bank 1 Bank 2 Bank 1 Bank 2 Bank 1 Bank 2
Empty
Total Memory:
16 MB 80 MB 128 MB
ColorScript 330 Bank 1 Bank 2 Bank 1 Bank 2 Bank 1 Bank 2
Empty
Total Memory:
32 MB 96 MB 128 MB
8 8 32 32 8 8 32 32 32 32
16 16 32 32 16 16 32 32 32 32