QMS ColorScript 310, User Manual

Page: 34 / 196

Chapter 1 — Installing Your Printer
18
2. Press the Select button to toggle between PS for
PostScript mode and RAST for Raster mode.
3. Once you’ve selected Raster mode, wait for the LCD to
return to Ready.
If you print from an application that does not have a Raster
mode SCSI driver, you will need to switch the ColorScript 310/
330 printer back to PostScript mode. To switch back to
PostScript mode:
1. Press the Menu button repeatedly on the ColorScript
310/330 printer’s front panel until MODE displays in
the LCD.
2. Press the Select button to toggle between PS for
PostScript mode and RAST for Raster mode.
3. Once you’ve selected PostScript mode, wait for the LCD
to return to Ready.
Switching the Printer On
WARNING:
Make sure that you have removed all packing
materials from inside and around the printer. Open the printer cover
and the paper tray cover to verify that all packing materials are
removed.Refer to Chapter 2, “Loading Paper and Film” for detailed
instructions on opening the paper cassette.
1. Press the “|” end of the power switch to switch the
printer on.
The printer’s power switch is located on the lower left
corner on the front of the printer, and is marked “|” for ON
and “
°
” for OFF.