Qiagen QIAgility, User Manual

Page: 200 / 334

QIAgility Software
5-138 QIAgility User Manual 11/2011
8. Enter the concentrations directly into the “Reagents”
table.
9. Click on the “Next” button.
10. The “Reagent selector” window will open. The reagents
are listed in the “Reagents” panel in white boxes.
11. Each reagent must be assigned a location, otherwise the
reagent import will be canceled. To do this, left-click on
a reagent and drag it to the desired well on a reagent
plate. Do this for all the reagents. If the reagent locations
do not matter, click and drag the “Auto” white box to the
desired reagent segment. Reagents will automatically be
assigned to a location. Selected wells will be highlighted
red.
Note : Some reagent locations may already be in use by
previously defined reagents. If the name of the reagent
used in the saved master mix setup is identical to
reagents already set up, these will automatically be
allocated to those positions.
12. To reset the location of any reagent, double-click on a
reagent in the list, then left-click and drag again.
Alternatively, click on the “Reset All” button to clear all
reagent locations, other than those that were defined
upon entering the screen.