Qiagen QIAgility User Manual Download Page 201

Page: 201 / 334

QIAgility Software

QIAgility User Manual 11/2011

5-139

13.

Click on the “Next” button.

14.

If only one reagent will be optimized (i.e., if option “1”

was selected in step 3), proceed to step 15. If more than

one reagent will be optimized (i.e., option “2” or “3”

was selected in step 3), repeat steps 7–13, and then

proceed to step 15.

15.

The “Optimisation Wizard — Replicates” dialog box will

appear.

How many

replicates

would you like

to produce?

Defines the number of replicates for each

reaction.

Master mix

Defines the master mix to be used.

Create

Premixed MM

Opens the “Plate/well Selector” window,

which enables a premixed master mix to

be set up.

Target plate

Defines the target plate that the reactions

will be pipetted into.

Summary of Contents for QIAgility















































































































































































































































































































































Search results

Summary of Contents for QIAgility

Reviews:

Brands by name

Popular brands

Qiagen QIAgility, User Manual

Search results

Summary of Contents for QIAgility

Reviews:

Brands by name

Popular brands