Qiagen QIAgility, User Manual

Page: 146 / 334

QIAgility Software
5-84 QIAgility User Manual 11/2011
Paste to current
cell
Pastes data from the system clipboard
(e.g., a list of “Yes”/”No” values from a
spreadsheet) into the “Reaction Data”
column.
Row height Select to adjust row height. A submenu will
appear. Select “Grow” to increase the row
height, and select “Shrink” to decrease the
row height.
Export Select to export the “Reaction Data” list. A
submenu will appear. Select either “Export
to CSV” or “Export to Excel.
Assign ID’s Enables groups of reactions to be assigned
the same value in the “ID” column. Left-
click and drag to select a group of cells.
Right-click on the selection and select
“Assign ID’s”.
Set
Concentrations
Enables groups of reactions to be assigned
the same value in the “Conc” column. Left-
click and drag to select a group of cells.
Right-click on the selection and select “Set
Concentrations”.
Well
The “Well” column indicates the label of the reaction well, as
determined by the plate type.
Final Contents
The “Final Contents” column describes the final composition
of the liquid in the well, as determined by a complete
simulation of the run.
Note : When pipetting operations add liquids to a well and
later remove them, the final well contents may be empty. This
is different to the data presented when hovering the cursor
over a reaction well on the software worktable. In this case,
only liquids added to the well are shown.