Qiagen QIAgility, User Manual

Page: 152 / 334

QIAgility Software
5-90 QIAgility User Manual 11/2011
appear. This warning must be resolved before the run can be
started.
1. Left-click on a plate with “Reaction” function.
2. The “Reaction” right-hand pane will appear.
3. Click on the “Add” button.
4. Select a sample bank from the drop-down menu in the
“Samples” panel.
Note : Only one sample bank can be selected per
reaction.
5. If desired, select “Pre-mix before taking sample?” and
enter the number of times to mix.
6. Select the components of the reaction. Available master
mixes are listed in the “Mixes and reagents in mix wells”
panel, and available unmixed reagents are listed in the
“Unmixed reagents” panel. Left-click in the boxes next to
the required components to select them. A tick will
appear next to the components which have been
selected.
7. Click on the button to select the target reaction plate.
The “Plate/well Selector” window, which displays a
schematic of the worktable setup, will appear.
8. Left-click on a reaction plate to select it. The “Reaction
Configuration” dialog box will reappear.