Qiagen QIAgility User Manual Download Page 139

Page: 139 / 334

QIAgility Software

QIAgility User Manual 11/2011

5-77

Diluent can be used as a sample for nontemplate controls.

Standards are treated in the same way as samples.
Sample banks can be modified or created using the

“Sample” right-hand pane. To view the “Sample” right-hand

pane, left-click on a “Sample” well.

“Sample” right-hand pane

Delete Bank

Deletes the selected sample bank. Deleting

a sample bank will not affect sample

names, sample IDs, or concentrations.

Rename Bank

Opens a dialog box in which the sample

bank name can be changed. Click on the

“OK” button to continue.

New Bank

Displays the “Update Sample Bank” dialog

box, which enables a new sample bank to

be created. See Section 5.8.1.

Edit Bank

Displays the “Update Sample Bank” dialog

box, which enables an existing sample

bank to be modified. See Section 5.8.1.

Summary of Contents for QIAgility















































































































































































































































































































































Search results

Summary of Contents for QIAgility

Reviews:

Qiagen QIAgility, User Manual, Page: 139 / 334

Search results

Summary of Contents for QIAgility

Reviews: