Qiagen QIAcuity 911000, User Manual

Page: 309 / 314

QIAcuity User Manual 06/2022 309
Appendix E
–
User management permissions
The table below shows all available permissions for the user management including short
descriptions and technical names. These technical names are shown in audit trail details in case a
user has made changes to any users or roles.
Permission Technical name Description
Log in [Instrument and PC software]
Instrument CSW_USER_LOGIN User can login to Instrument
(login and password is needed).
Suite Software SUITE_USER_LOGIN User can login to Suite Software
(PC software) (login and
password is needed).
Instrument accesses [Instrument software]
Instrument Maintenance CSW_INSTRUMENT_MAINTENANCE User can update Instrument and
go to Data Management, Self-
Check, Servicing and
Configuration.
Experiment Schedule CSW_PLATE_EXPERIMENTSCHEDULE User can set up dPCR
parameters (priming, cycling,
imaging).
Create Support Package CSW_INSTRUMENT_CREATESUPPORTPACKAGE User can download and upload
support package.
Plates [Instrument and PC software]
Create Plate QIACUITY_PLATE_CREATE User can set up dPCR
parameters (priming, cycling,
imaging), reaction mixes
(reagents), samples (control,
non-control) and create Plate
layout.
All Plates
Run Experiment CSW_PLATE_ALL_RUN User can run/stop an
experiment and eject Plate(s)
from Instrument.
Edit Plate Data QIACUITY_PLATE_ALL_EDITDATA User can check and edit
parameters of existing Plate
(dPCR parameters, Plate layout
(samples, reaction mixes
(reagents), controls), and mark it
as primed.
Edit Analysis Data SUITE_PLATE_ALL_EDITANALYSIS User can change the threshold
and use lasso selection on the
Analysis page of all Plates to
verify the accuracy of the
results.