Qiagen QIAcuity 911000, User Manual

Page: 234 / 314

QIAcuity User Manual 06/2022 234
Note : If the selected analysis source contains replicates of the reference sample, your results can be
calculated only by using mean results for replicates. In this case the “Show mean values for
replicates” check box is marked and can’t be changed. In this case there is a warning message
above the diagram title and when the user hover on the checkbox, a tooltip appears to inform the
user that selected analysis source contains replicates of the reference sample and result is calculated
only by using mean results for replicates.
To add the point diagram to the report, click Add to report . For more information on reports, see
section Reports.
Concentration diagram tab for copy number variation
The concentration diagram tab shows the diagram that displays the concentration values of the
configured copy number variation test and the confidence intervals related to every value. A
concentration diagram has two axes.

x-axis represents labels of wells and samples that it belongs to

y-axis represents the concentration values for selected targets or channels for each well. A
confidence interval displayed as an error bar is shown for each of the bars on the diagram.
The y-axis scale can be modified using the buttons located below each graph. The buttons are
visible when you hold the pointer over a graph. To view the values on a linear scale, click
lin . To
view the values on a logarithmic scale, click log10 .
To view an additional toolbar that enables actions related to the diagram, such as downloading
the plot, hold the pointer over the diagram. For more details about the toolbar, refer to Diagram
options.