Qiagen QIAcuity 911000 User Manual Download Page 50

Page: 50 / 314

QIAcuity User Manual 06/2022

Visit

www.qiagen.com

and go to the Software section of the QIAcuity product page to check if an

updated software version is available for download.

Note

: Only users with an Administrator and Lab Leader role can perform software updates.

On a computer running Microsoft Windows, download the software update from

www.qiagen.com

Insert the USB drive provided with the QIAcuity, create a new folder named

update

, and extract

the update software into this folder.

It is recommended

clear the data first by clicking

Force clear

in Data Management under

Tools

before the update.

On the Home screen, tap

Configuration

Select the System tab.

Note

: The current software and firmware version are located in the Device Info pane.

10.

Connect the USB drive to the instrument.

11.

The software version of the update package on the USB is displayed in the Update Info (USB)
panel.

Note

: If the USB drive is empty, no information is displayed in the Device Info (USB) panel.

12.

Tap

Update software

to proceed.

13.

The Update Flash Controller Software and Firmware window is shown.

14.

Tap

Start

to begin the software update or tap

Cancel

to return to the previous window.

15.

The update files are copied from the USB drive to the instrument’s internal drive. The status of
the file copying process is shown on the screen.

Note

: If an error occurs when the files are being copied, an error message is shown on the

screen. Tap

Cancel

to stop the process. Remove the USB drive and tap

Reboot

to restart the

instrument. If the QIAcuity does not function after an unsuccessful software update, contact
QIAGEN Technical Services.

16.

After the software update files are copied, tap

Reboot

to restart the instrument.

17.

The QIAcuity restarts and installs the software firmware update, which can take up to 1 hour.

18.

Important

: In case of update from instrument software 1.0.0.84 to 2.1 a second restart is

required to be able to log in.

19.

After the final restart of the instrument, the network icon and the Software Suite icon should be
green and you may login with the admin credentials previously defined in the QIAcuity
Software Suite.

Summary of Contents for QIAcuity 911000



























































































































































































































































































































Search results

Summary of Contents for QIAcuity 911000

Reviews:

Related manuals for QIAcuity 911000

Brands by name

Popular brands

Qiagen QIAcuity 911000, User Manual

Search results

Summary of Contents for QIAcuity 911000

Reviews:

Related manuals for QIAcuity 911000

Brands by name

Popular brands