Qiagen QIAcuity 911000, User Manual

Page: 244 / 314

QIAcuity User Manual 06/2022 244
Reports
In the QIAcuity Software Suite, you can create reports about your analysis results of a plate. All
created reports remain accessible in the Software Suite and can be downloaded. Only unsigned
reports can be deleted.
Creating a new report for a plate from the analysis environment
To create a new report from your analysis results, follow these steps:
1. Enter the Analysis environment of a finished plate. For more information about analyzing a
plate, see Analysis.
2. To include a diagram or table of your analysis in your report, check the Add to report box of
the corresponding diagram you want to include. Checking this box saves and pre-selects the
corresponding diagram in the report.
3. To remove the pre-selection of diagram, clear the Add to report box.
Note : The total number of pre-selected diagrams for the report is always shown in the footer.
The number of diagrams/tables to be included in one report for a plate is limited to 70.
Example of a diagram to be included in a report.
4. Click on the arrow icon next to the number of selected graphs in the footer to open a
preview window of all your preselected diagrams.