Qiagen QIAcuity 911000, User Manual

Page: 80 / 314

QIAcuity User Manual 06/2022 80
5. If you want to modify the temperature steps, refer to these steps:

To edit or delete a temperature step, tap the More icon, then tap Edit or Delete .

To group the temperature steps, check the corresponding boxes of more than one
temperature step, then tap
Group .

To ungroup a group of temperature steps, tap the More icon, then tap Ungroup .
6. Perform the following steps in the Imaging tab:
6a. In the Imaging tab, select the applicable channel, then enter the exposure duration and
gain in the
Exposure duration and Gain fields.
6b. To include more steps in the run, tap the Add icon, then select the applicable
step. Provide the required information for the step. Repeat this step if more steps are
needed for the run. In total, 9 steps can be performed per plate.
6c. Tap Save to save your progress or tap Done to save the run and go back to the Running
Status window.
Note : If any required field is not completed, an error message displays to list the missing
information required in each field.