Qiagen QIAcuity 911000, User Manual

Page: 160 / 314

QIAcuity User Manual 06/2022 160
Adding NTCs to the plate
1. On a marked well, left-click the icon or right-click the well.
Note : You can also mark more than one well if you want to assign a Non Template Control to
multiple wells.
2. Click Add NTC .
3. The Add Non Template Control window appears.
4. Select an existing NTC from the Non Template Control name list or enter a new Non Template
Control name.
5. Click Assign .
6. The NTC is added and the well is marked with NTC .
Note : To edit or remove the NTC from the well, right-click the well and select Edit NTC or
Remove NTC . You can also remove the control from the well by clicking the icon and select
Remove NTC . To remove the NTC and the reaction mix from the well, select Clear well .