Promega Maxprep AS9100, Operating Manual

Page: 9 / 118

7
Maxprep™ Liquid Handler | TM509 | Revised 1/19
Introduction
1.5 Maxprep™ Liquid Handler Specifications
Instrument Specifications
Desktop PC Windows
®
10 Operating System with Ethernet connection to
instrument, wired connectivity to local network
Communication Ethernet
Weight Approximately 220lb (98.6kg)
Dimensions (W × D × H) 42.1 × 27.8 × 33 inches (106.9 × 70.6 × 83.3cm)
height with door open: 48.4 inches (123cm)
Power Requirements Input: 100–240VAC, 50/60Hz, 5A
Output: 42VDC ± 5%, 600W max
250VAC, 5A, low breaking capacity, time-lag fuse (AC250V,
T5AL, 5 × 20mm)
Operating
Temperature
Relative Humidity
Altitude
15–35°C (59–95°F)
30% to 85% non-condensing
0–2,000m above sea level
Storage
Temperature
Relative Humidity
–20° to 70°C
10% to 90% non-condensing
UV Bulb (optional) Average lifetime approximately 10,000 hours, length 9.2in
(233mm base face to face, diameter 15mm, 11W, 0.43A
current, 25.6V, UV-C, UV output 32W at 1 meter)
Regulatory
Compliance
For Research Use Only. Not for use in Diagnostic Procedures.
CE Compliance Pollution degree 2.
Installation category II.
Indoor use only.
Main supply voltage fluctuations are not to exceed >10% of the
nominal supply voltage.
This instrument complies with the requirements of the EU
Directives for electromagnetic compatibility (EMC Directive)
and for electrical safety (LVD). Compliance with the relevant
directives was demonstrated by third-party testing to the
appropriate EN and IEC standards. The product bears the
CE mark on its label as evidence of compliance, and an EU
Declaration of Conformity for the product is available from
Promega on request.