Promega Maxprep AS9100, Operating Manual

Page: 110 / 118

108
Maxprep™ Liquid Handler | TM509 | Revised 1/19
Appendix: Configuring the PC
11.6 Managing Maxprep™ Access Levels for a Windows
®
User Account
(continued)
5. There will be a list of groups shown in the center part of the screen. Near the bottom of this
list you will see two groups ( PromegaAdministrators and PromegaUsers ) that are used
to assign access level rights for the Maxprep™ software to Windows
®
user accounts.
6. Depending on the access level from which you wish to remove a particular user, double-
click either the PromegaAdministrators or the PromegaUsers list item.
7. This will open the ‘PromegaAdministrators Properties’ or the ‘PromegaUsers Properties’
screen. Under the Members: section of the screen, click the name of the user you wish to
remove from this Promega access group (Figure 65).
Figure 65. Removing a Windows
®
user account from a Promega access-level group.
Click the Windows
®
user account you wish to remove from the selected Promega access-
level group, and then click the Remove button.
8. Click the Remove button to remove this user from this Promega access group.
9. Click OK on the ‘Properties’ screen to accept the changes or click Cancel to discard the
changes. Either selection will return you to the ‘Local Users and Groups (Local)’ screen.
10. Close the ‘Local Users and Groups (Local)’ screen by clicking the X in the upper right corner
of the screen.
11. Restart the PC for new account access levels to take effect. To do this, click the
Start
button in the lower left corner of the screen, and then click the
Power
icon and select the
Restart
item (Figure 66).
13937T
A