92
Maxprep™ Liquid Handler | TM509 | Revised 1/19
Appendix: Configuring the PC
11.3 Adjusting Volume Settings
Volume settings on the PC can be adjusted through one of two means.
1. On the keyboard press Fn+F7 to mute the speaker, Fn+F8 to decrease the speaker volume,
or Fn+F9 to increase the speaker volume on the PC.
2. Press the
Speaker
icon on the right side of the task bar to open a volume slider. Use the
slider to increase, decrease or mute the speaker on the PC.
11.4 Configuring Date and Time Settings
The current date and time will be configured during installation of the Maxprep™ Liquid Handler.
After installation, if there is a need to change the Date, Time or Time Zone please contact
Promega Technical Services for information on how this can be accomplished.
11.5 Managing Local Windows
®
User Accounts
Operator credentials and access levels for the Maxprep™ Liquid Handler software are controlled
through assigning accounts in the Windows
®
operating system to one of two Promega access-
level groups. The sections below detail the process of adding and removing local Windows
®
user accounts that can be assigned to the access-level groups for the Maxprep™ Liquid
Handler software. The instructions for adding and removing local Windows
®
user accounts are
intended to be used when the Maxprep™ Liquid Handler is run as a stand-alone device (i.e., not
connected to a network domain). To connect to your site internet domain, consult with your IT
department and follow the instructions in Section 11.9, Connecting to a Network.
When your Maxprep™ Liquid Handler arrives, the PC will be configured with a Windows
®
user
account called Maxprep. This account is password protected (Default Password = Promega)
and is configured with Windows
®
administrator access rights as well as Maxprep™ Liquid
Handler software administrator access rights.
Note:
If the PC is connected to your site internet domain, your IT department should be
consulted on how to add or remove users on the PC. Do
not
use these instructions if accounts
on your company domain are used to access the PC.
Summary of Contents for Maxprep AS9100
