111
Maxprep™ Liquid Handler | TM509 | Revised 1/19
Appendix: Configuring the PC
11.8 Shutting Down and Restarting
Occasionally you will need to shut down or restart the PC. The instructions below detail the
process of shutting down or restarting the PC.
1. Close the Maxprep™ software if it is open. Click the
X
in the upper left corner of the screen,
and then confirm that you want to exit.
2. From the ‘Desktop’ screen, swipe upward from the bottom of the screen to expose the Task
bar, and then touch the
Start
button on the left side of the Task bar.
3. Click the
Power
icon to open the Power menu (Figure 68).
Figure 68. Power options popup. Clicking the Power button from the Start menu opens
the Power options popup. This popup presents options for managing the PC power state.
4. If you wish to shut down the PC, in the Power menu click the
Shut down
item.
5. If you wish to restart the PC, in the Power menu click the
Restart
item.
6. The PC will perform the selected item and either shut down or restart.
14900T
A
Summary of Contents for Maxprep AS9100
