97
Maxprep™ Liquid Handler | TM509 | Revised 1/19
Appendix: Configuring the PC
10. You have now added a new account to Windows
®
10. Click the
X
in the upper right corner
of the ‘Accounts’ screen to close the screen. Proceed to Section 11.6 to assign access
levels for the Maxprep™ Liquid Handler software to this new account, or repeat these steps
to create additional accounts.
Removing a Local Windows
®
User Account
If the Maxprep™ Liquid Handler system is run as a stand-alone device (i.e., not connected
to your site domain), you can remove local Windows
®
accounts on the PC that are no
longer necessary. Below are instructions for removing a local Windows
®
user account in the
Windows
®
10 Operating System.
Notes:
1. Only a Windows
®
user account with administrator-level access in the Windows
®
operating system can remove accounts.
2. If the PC is connected to your company internet domain, your IT department should be
consulted on how to limit access to the PC. Domain users logged into the PC will not
have access to run the Maxprep™ Liquid Handler software unless they have been
added to one of the Promega access groups (Section 11.6). Do not use these
instructions to remove an account from the PC if accounts on your company domain
are used to access the PC.
3. Make sure the local Windows
®
user account to be deleted is signed out of the PC
(refer to Section 11.7, Managing the Current Active Account).
1. Close the Maxprep™ Liquid Handler software if it is open. Click the
X
in the upper left
corner of the screen, and then confirm that you want to exit.
2. Confirm that the Windows
®
user account to be removed is not signed into Windows
®
. Click
the
Start
button on the left side of the Task bar. Choose the
Accounts
icon from the left side
of the Start menu to open the Account information popup (Figure 56). Other user accounts
will be listed and indicated as signed in if the account is currently signed in on the PC.
Changing the account
type for a user only
affects the access
level in the Windows
®
10 operating system,
not in the Maxprep™
software. Follow
the instructions
in Section 11.6 to
change access level
rights within the
Maxprep™ software.
Summary of Contents for Maxprep AS9100
