Promega Maxprep AS9100, Operating Manual

Page: 37 / 118

35
Maxprep™ Liquid Handler | TM509 | Revised 1/19
Maxprep™ Software
Figure 15. Method import file selection. Use the ‘Methods’ file browser to navigate to the
location of a method (.package) file. Valid import files are shown on the right side of the file
browser as blue rectangles (yellow when selected).
5. Within the ‘Methods’ screen, navigate to the location at which you saved the method
(.package) file. The current path will be shown in yellow boxes along the top of the window.
Select any aspect of the path to navigate to the desired folder. Press the
Drive\ button to
select the drive in which to search. Folders within the current path are shown as red
rectangles on the left side of the screen. Valid method (.package) files will be shown as blue
rectangles (yellow when selected) on the right side of the screen.
6. Select the blue rectangle(s) corresponding to the desired (.package) file(s) to highlight, and
then press the OK button to import the selected methods.
Note: When importing the same version of an existing method, the imported method will
overwrite the existing method and all existing variants will be deleted. A warning is
displayed, indicating that the existing method and variants will be deleted. The warning will
ask whether you wish to proceed with import; press
Yes
to delete the existing method and
variants or
No
to cancel the import. New versions of methods will not overwrite existing
methods. To remove a previous version, delete the desired method by touching the
X
on the
right side of the method entry.
7. A screen will indicate successful import of the method(s) into the software. If import was
successful, the new method file(s) will appear in the list of method files on the ‘Methods’
screen.
14648T
A