Porsche Turbo 2007 Driver Manual Download Page 313

Page: 313 / 347

312

Minor Repairs

Replacing bulbs at rear

1. Unscrew fastening screws

with the cross-

head screwdriver from the tool kit.

2. Remove lamp bracket

- Rear fog light

- Direction indicator

- Reversing light

3. Replace the defective bulb (bayonet fitting).

Insert lamp bracket and screw in fastening

screws.

4. Install tail light.
5. Check operation of lights.
6. Close the rear lid.

Number plate lights

Changing bulb for number plate light

1. Unscrew both screws

and remove the light.

2. Push the bulb holder apart and pull the bulb out

of the socket.

3. Replace defective bulb.
4. Insert light, initially tighten both screws

and

then screw in uniformly.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands