Porsche Turbo 2007 Driver Manual Download Page 79

Page: 79 / 347

Windows and Sliding Roofs

Power windows in passenger’s door and rear doors

Closing window with the rocker switch

Pull rocker switch until the window has reached

the desired position.

One-touch operation for front windows

Pull or press rocker switch in the driver’s door to

its final position.

Window moves to its final position.

Press or pull again to stop the window in the

desired position.

Disabling power windows in the

rear doors

The power windows, central locking buttons on

the rear doors and the rear control panel for the

air conditioning can be disabled by means of the

safety button in the armrest of the driver’s door.

Press the safety button to switch child protec-

tion on and off.

The symbol in the safety button lights up if

child protection is active.

On vehicles

without

Porsche Entry & Drive

Opening/closing windows with vehicle key

Hold the car key in the door lock in the

unlocking or locking position until the windows

have reached the desired position.

If you unlock the vehicle with the key at the door

lock, only the driver’s door is unlocked. In order to

prevent the alarm system from being triggered,

you must switch the ignition on within 15 seconds

of opening the door.

Switching child protection on/off

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands