Porsche Turbo 2007 Driver Manual Download Page 141

Page: 141 / 347

140

Multi-Purpose Display and Instruments

Brake pads

Have the brake pads changed immediately.

Consult a qualified specialist workshop.*

Warning Brake proportioning

Stop immediately in a suitable place. Do not continue driving.

Have the fault remedied at a qualified specialist

workshop.*

ABS failure

Drive carefully. Have the fault remedied by a qualified specialist

workshop.*

PSM failure

Drive carefully. Have the fault remedied by a qualified specialist

workshop.*

Warning Brake fluid level

Stop immediately in a suitable place. Do not continue driving.

Have the fault remedied at a qualified specialist

workshop.*

Parking brake

Parking brake not released.

PSM on

Porsche Stability Management was switched on.

PSM off

Porsche Stability Management was switched off.

PHC unavailable

The Porsche Drive-off Assistant (manual transmission) is not

available.

Brake booster faulty

Greater brake pedal force necessary.

Drive carefully to the nearest qualified specialist workshop.*

Chassis Sport

Current setting of Porsche Active Suspension Management

Chassis Normal

Current setting of Porsche Active Suspension Management

Chassis Comfort

Current setting of Porsche Active Suspension Management

Light on

instrument

panel

Warning message on

the multi-purpose display

Meaning/measures

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands