Porsche Turbo 2007 Driver Manual Download Page 21

Page: 21 / 347

Opening and Locking

Opening doors

Opening unlocked doors

Pull inner door handle once.

Opening locked doors

(Not if the vehicle was locked by pressing the

button once. The doors cannot be opened in this

case.)

Pull inner door handle twice.

Securing rear doors

You can secure the rear doors to prevent uninten-

tional opening when driving.

Switching child lock on and off

The child locks are fitted in the lock area of the

rear doors.

The doors cannot be opened from inside when the

child locks are engaged.

To engage: Turn child lock to position

To disengage: Turn child lock to position

The power windows, central locking buttons on

the rear doors and the rear control panel for the

air conditioning can be disabled by means of the

safety button in the armrest of the driver’s door.

Press the safety button to switch child

protection on and off.

The symbol in the safety button lights up if

child protection is active.

Switching child protection on/off

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands