Porsche Turbo 2007 Driver Manual Download Page 304

Page: 304 / 347

Minor Repairs

303

Changing bulb for additional high beam

1. Press down both release tabs

and remove

cover.

2. Turn bulb socket

counter-clockwise and

remove.

3. Remove defective bulb and replace.
4. Insert bulb socket and turn in clockwise direc-

tion.

Make sure that the bulb is installed in the

correct position.

5. Fit cover on headlight.

Both release tabs must be fully engaged.

6. Install headlight.
7. Check operation of bulbs.
8. Close bonnet.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands